When you clean your home and the interior walls, do you ever take the time to look up and check the ceiling?
It sometimes will happen that a stain will appear on the ceiling — one that comes about through water damage — and this is just the kind of thing that you will need to take care of before it gets worse and possibly causes actual damage to your ceiling.
It is quite possible, rest assured, to clean the water stain on your ceiling and more importantly make sure that it does not come back.
With that being the case, let us now consider and look at the five critical steps to cleaning a water stain on your ceiling in Tarrytown, TX in 2020.
1. Find Out The Reason The Stain Exists
If you don’t first find the reason that the water stain on your ceiling is there, cleaning up will be an exercise in futility as it will just come back.
Often times, your water stain will be there as a result of some kind of appliance that has developed a leak on the floor above the ceiling in the room — you will have to either try to repair the appliance yourself if it’s at all possible, get a contractor to repair it, or replace it.
The other possibility is that you may have a problem with the roof — a leak that may have developed due to a missing tile or a hole that otherwise could allow water in.
2. Clean The Water Stain
The next step in the process is to actually clean the water stain — you are going to want to take a mix of bleach and water (one part bleach to three parts water.)
Once you get the stain clean and cleared off, you should allow the ceiling to dry.
3. Sand The Area
You will next need to sand the area on the ceiling where the water stain was — this is a necessary step such that the area where you will be priming and painting will be smoother.
A sanded ceiling is one that is better for painting, generally speaking.
4. Prime The Stain Area
It’s essential to prime the area where the stain was — especially because there are many primers that are specifically formulated to block stains well.
You will want to extend the priming a bit beyond the area of the stain.
Applying a coat of primer on the ceiling will help get the ceiling be properly smooth and help the paint adhere well to the ceiling.
5. Paint The Ceiling
The last step in the process is to paint the area of the ceiling where the stain had been as well as a bit past where it had been, as you did with the primer.
The key thing to bear in mind is that if you note that the paint color does not match well with the color of the ceiling — paint does sometimes run out or go bad and the new paint that you got might not be the same — it is best to paint the entire ceiling.
It’s important once you have finished painting the ceiling to allow ample time for the paint to dry — and then to paint a second coat of paint.
One of the biggest mistakes that people make is that they underestimate how much time this kind of project will take them — it’s not something that will be done in only a couple of hours owing to how long it actually takes for paint to dry.